Three-Tier Container End Racking QF1066 – 550kg Per Shelf

Three-Tier Container End Racking – QF1066 | 1850mm Bay

The QF1066 is a single bay of three-tier steel racking designed to assemble inside the end of a shipping container. It fits any standard 20ft or 40ft container and delivers 550kg of rated capacity per shelf. Each unit ships flat and assembles without tools inside the container.

Furthermore, the blue and orange powder-coated finish provides a scratch-resistant, durable surface suited to the demands of active storage and site environments.

Browse the full range of container accessories available in our store.

---

QF1066 Three-Tier Racking Specifications

Condition: New — Powder-coated steel, chipboard shelves included. Ready to assemble.

Frame Dimensions

Component	Dimension
Overall Bay Width	1,850 mm
End Frame Height	2,000 mm (2 m)
End Frame Width	600 mm (each frame)
Number of Tiers	3
Beams Per Shelf	2

Shelf & Load Specifications

Specification	Value
Shelf Material	25 mm chipboard
Capacity Per Shelf	550 kg
Height Adjustment	50 mm increments
Safety Clips	Included — beam retention standard

Finish & Assembly

Detail	Specification
Frame Finish	Powder coated — blue and orange
Assembly	Tool-free — beams slot into pre-assembled end frames
End Frames	Pre-assembled — no frame build required on site
Compatible Containers	All standard 20ft and 40ft ISO shipping containers

---

Key Features

• 550 kg per shelf: Each tier handles heavy storage loads — tools, parts, bagged goods, and stock.
• Adjustable height: Shelf levels move in 50 mm increments to suit different cargo heights.
• Tool-free assembly: Beams slot directly into pre-assembled end frames. No hardware required.
• Safety clips included: Beam retention clips prevent accidental dislodgement during loading.
• Powder-coated finish: Blue and orange coating resists scratches, corrosion, and heavy use.
• Standalone use: This racking also installs in any container or shed without modification.
• Chipboard shelving: 25 mm board provides a solid, level surface across the full shelf width.

---

Container Placement Guide

Correct placement depends on your container size. Therefore, review the guide below before ordering.

20ft containers — end racking

In a 20ft container, the QF1066 mounts at the closed container end. As a result, the remaining floor space remains clear for pallets, vehicles, or equipment. This is the most common configuration for tool and parts storage.

40ft containers — end racking only

In a 40ft container, end racking works well when the side walls remain clear. However, if you install side-run racking down the length of the 40ft container, there is not enough clearance to fit end racking at the same time.

In addition, the 40ft configuration supports racking on both sides of the container (two-tier or three-tier runs). If you want end-only racking in a 40ft container, the QF1066 fits correctly without conflict.

Side racking in 40ft containers — product selection

Configuration	Product	Code
Two-tier racking — container end	Two-Tier Container End Racking	QF1065
Three-tier racking — container end	Three-Tier Container End Racking	QF1066 (this product)
Side racking — 40ft, both sides	Two-tier or three-tier side run	Enquire

Download the racking placement diagram for a full layout reference before ordering. Contact us if you are unsure which configuration suits your container.

All racking is compatible with standard ISO series 1 freight containers. Moreover, racking installs without drilling or permanent modification — the container remains fully usable after removal.

---

Common Applications

Trades and construction

Electricians, plumbers, and builders store consumables, hand tools, and safety gear on adjustable shelves. Furthermore, the 550 kg rating handles heavy stock without flex or failure.

Workshop and spare parts storage

Mechanics, engineers, and fleet operators use the QF1066 to organise oil, filters, fasteners, and small parts. As a result, inventory is easy to locate and restock without searching through loose boxes.

Agricultural and rural storage

Farms use the racking for chemicals, seed, and veterinary supplies. The adjustable shelf height accommodates varying drum and bag sizes without wasted vertical space.

Retail overflow and warehouse staging

Retailers and distribution businesses use container racking to stage pick-and-pack stock. Additionally, the racking removes itself cleanly when the container returns to freight duty.

If you need a container already fitted with racking and ready to work, explore our modified containers with internal fitout options.

---

Assembly Overview

The QF1066 assembles inside the container in four steps. No tools are required.

1. Position the two pre-assembled end frames at the correct shelf spacing.
2. Slot the beams into the frame uprights at your chosen height settings.
3. Clip the safety clips onto each beam to lock the beams in place.
4. Lay the 25 mm chipboard shelves across the beams on each tier.

The end frames arrive pre-assembled. Therefore, no frame construction is required on site. The full bay assembles in under 30 minutes.

---

Why Choose Australia Shipping Container Stands for Container Racking?

• Heavy-duty rated: 550 kg per shelf handles demanding trade and industrial loads.
• Adjustable: 50 mm increment height adjustment suits any cargo mix.
• Powder-coated steel: Scratch-resistant finish built for active site conditions.
• No tools needed: Slot-and-clip assembly is fast and straightforward.
• Container-compatible: Designed specifically for ISO 20ft and 40ft container interiors.
• Australia-wide delivery: In stock and ready to ship with your container or as a standalone order.